ICON VEHICLE DYNAMICS 18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT

ICON 2020-2023 Jeep JT, 2" Lift/2018-2023 Jeep JL, 2.5” Lift, Front, Dual Rate Coil Spring Kit

Product Details

The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.

2.5" front lift height on Wrangler/2" front lift on Gladiator
Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
3" front increase in wheel travel (when paired with ICON shocks)
Improves on and off-road ride quality over stock
Dual rate coil springs with lifetime guarantee against sagging/breakage
100% bolt-on system makes for an easy install
“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Technical Notes

OEM Wheels & Tires Fitment: Yes
TECH NOTE: Diesel models will net approx. 1.75" of lift over stock due to their heavier weight.
TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims. See ICON Help Center for more information.
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 4.5” Backspace / -12mm Offset
Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: 22029)
TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL/JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
TECH NOTE: Wrangler JL 4-door will have front lift height of 2.5" over stock
TECH NOTE: Wrangler JL 2-door will have front lift height of 3" over stock
TECH NOTE: Gladiator JT will have front lift height of 2" over stock

Warranty Information

Warranty information unavailable

Compatible Make / Model

Specification

Brand	ICON Vehicle Dynamics
Prop65 Warning	WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Technical Notes	OEM Wheels & Tires Fitment: Yes TECH NOTE: Diesel models will net approx. 1.75" of lift over stock due to their heavier weight. TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims. See ICON Help Center for more information. Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 4.5” Backspace / -12mm Offset Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: 22029) TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL/JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle. TECH NOTE: Wrangler JL 4-door will have front lift height of 2.5" over stock TECH NOTE: Wrangler JL 2-door will have front lift height of 3" over stock TECH NOTE: Gladiator JT will have front lift height of 2" over stock
UPC	00840103401324
Finish	Powdercoated
Maximum Lift Height	2.5
Front Spring Rate Type	Variable
Spring Color	Black
OEM Wheels & Tires Fitment	Yes
Recommended Aftermarket Tires	35" x 12.50" (37" x 12.50" with optional extended bump stop spacer kit PN: 22029)
Recommended Aftermarket Wheels	(Non-Rubicon) ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
Width	14.00 in
Length	22.00 in
Depth	8.00 in
Weight	25.0000 lb