Garage Customer Service Center
Back to Main Menu
Customer Service Center

Free Shipping on Orders $99 or More! *UPS Ground    Shop Now

Buy Now, Pay Later with PayPal    Shop Now

Now Hiring!    Join The RANDYS Team!

CS-D3-BC-CS-10-D

Product Details

Utilizing Carli SPEC 2.0″ Diameter, Remote Reservoir shocks, Carli has developed a tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use. The remote reservoir Carli SPEC 2.0 boasts 6063 Aluminum construction, anodized body for corrosion resistance, 5/8″ hardened steel chrome plated shaft, full serviceability & rebuildability and are built with 1-peice bushings in the 6061 billet rod-ends. These shocks are spec’d with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation. We back these with a 1-year warranty, serviced by Carli.The Details: Your truck will sit 3” higher in the front (year/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1”-2” via the customer’s choice of a Progressive Add-A-Pack or Full Progressive Leaf Pack. The Progressive Add-A-Pack replaces the factory overload with a 5-Leaf, progressive pack that changes the final rate of the spring pack keeping the rear planted while increasing traction and predictability. The optional Full Progressive Leaf Pack replaces the entire factory leaf spring assembly increasing travel and drastically increasing comfort throughout the entire usable travel stroke at the cost of a 15% payload reduction from a standard 2500. This payload reduction can be supplemented back to factory 3500 SRW capacity with the addition of the Long Travel Airbags for the best of both worlds; ride quality and payload capacity/load control.When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options (unless 1994-2002, then there’s only one); extended, Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with ½” FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement points. Factory pillow-bushings are re-used to assemble the sway bar to the lengthened link. Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension (in close competition with the full progressive leaf spring upgrade).When lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver’s side ¾” and back toward the cab ½”. This system includes an Adjustable Track Bar to push the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application. We also recommend the purchase of a set of extended control arms to shift the axle forward to its new center of travel.Wheel and Tire: This system will fit up to a 37” tire with our High Clearance Control Arms and Full Progressive Leaf Springs on wheels no more than 9” wide with 5.75” of backspacing. If running factory control arms or wheels; we recommend an All Terrain 35” tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:

  • Features Carli-Tuned remote reservoir 2.0 shocks which provide a more comfortable on-road feel and better offr-road performance. Corrosion resistant aluminum bodies provide long-lasting finish.
  • System includes linear-rate front coil springs, front and rear shock package, and adjustable track bar.
  • Truck wil sit 2.5-3" higher (year/cab coniguration dependent) and wheel travel will be increased by 50% thanks to the taller, lighter rate coil springs.
  • Fits up to 37" tires with ease for a more aggresize appearance and better offroad performance.
  • Requires but does not include leaf spring option and sway bar option.

Technical Notes

  • Required and Optional Parts to support this system:
  • Sway Bar Options (REQUIRED): CS-DEL-10 or CS-DEL-10-12MM or CS-DTSB3-03
  • Control Arms: CS-CA-MS-10 or CS-DBCA-10
  • Leaf Spring Options: CS-DPAP-03-D or CS-DFSP-10-D or CS-DFSP-10-D-HD
  • Long Travel Bags: CS-DLTB-03-4.0 or CS-DLTB-12-D
  • Steering Stabilizer: CS-DLMSS-T or CS-DHMSS-03-T or CS-DSSOSK-T
  • Ball Joints: CS-DBJP-03

Warranty Information

Warranty information unavailable

Specification

Brand Carli Suspension
Technical Notes
  • Required and Optional Parts to support this system:
  • Sway Bar Options (REQUIRED): CS-DEL-10 or CS-DEL-10-12MM or CS-DTSB3-03
  • Control Arms: CS-CA-MS-10 or CS-DBCA-10
  • Leaf Spring Options: CS-DPAP-03-D or CS-DFSP-10-D or CS-DFSP-10-D-HD
  • Long Travel Bags: CS-DLTB-03-4.0 or CS-DLTB-12-D
  • Steering Stabilizer: CS-DLMSS-T or CS-DHMSS-03-T or CS-DSSOSK-T
  • Ball Joints: CS-DBJP-03
UPC 883584158639
ProxyNumber 15863
Maximum Lift 3.5
Spring Color Black
Bushings Included Yes
Width 12.00 in
Length 6.00 in
Depth 42.00 in
Weight 145.0000 lb
Brand: Carli Suspension

Carli Backcountry 2.0 Leveling System, Base, 3” Lift, 2010-13 Ram 2500/3500, Diesel

CS-D3-BC-CS-10-D

0 in stock , backorders available

$2,645.00
Please make a selection for each of the required (*) options above before adding item to cart.
Warehouse Availability
  • CA 0
  • KY 0
  • MN 0
  • TX 0
  • WA 0