ICON 1999-00 Ford F250/F350, 3" Lift Front Drop Hanger Suspension System

Product Details

This 3" system is designed to lift your Ford super Duty 3" in front to provide room for 33” tires. This system drops your stock springs 3", which allows for 3" of lift while maintaining the stock spring rate. This system comes with a 1" bump stop spacer (not pictured) to prevent spring fatigue during the suspension cycle. This system is the ideal for all Super Duties.

Increased wheel travel
Durable powder coat finish
Less body-roll than stock truck
Isolates Stock springs for Factory Like Ride Quality
No change in towing capacity
No drive shaft modifications needed
100% Bolt-on system - no drilling,cutting or welding necessary for install

Technical Notes

OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
APPLICATION NOTE #3: No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
APPLICATION NOTE #17: These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits

Warranty Information

Warranty information unavailable

Compatible Make / Model

Specification

Brand	ICON Vehicle Dynamics
Prop65 Warning	WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Technical Notes	OEM Wheels & Tires Fitment: Yes Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.) APPLICATION NOTE #3: No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional. APPLICATION NOTE #17: These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits
UPC	00840103416045
Maximum Lift	3
Bushings Included	NO
OEM Wheels & Tires Fitment	Yes
Recommended Aftermarket Tires	33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
Recommended Aftermarket Wheels	ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
Width	16.00 in
Length	16.00 in
Depth	9.00 in
Weight	48.0000 lb